Dell 2155 Color Laser, User Manual

Page: 332 / 761

330
Copying
FILE LOCATION: C:\Users\fxstdpc-
admin\Desktop\0630_UG??\Mioga_AIO_UG_FM\Mioga_AIO_UG_FM\section18.fm
D E L L C O N F I D E N T I A L – P R E L I M I N A RY 9 / 1 3 / 1 0 - F O R P R O O F O N LY
2 Press the (Copy) button.
3 Press button until
Margin Top/Bottom
is highlighted, and then
press the (Set) button.
4 Press or button or enter the desired value using the numeric keypad,
and then press the (Set) button.
* Denotes the factory default setting.
5 Press the (Start) button to begin copying.
Margin Left/Right
To specify the left and right margins of the copy:
1 Load the document(s) facing up with top edge in first into the ADF.
OR
Place a single document facing down on the document glass, and close the
document cover.
For details about loading a document, see "Making Copies From the
Document Glass" and "Making Copies From the ADF."
2 Press the (Copy) button.
3 Press until
Margin Left/Right
is highlighted, and then press the
(Set) button.
4 Press or button or enter the desired value using the numeric keypad,
and then press the (Set) button.
* Denotes the factory default setting.
0.2 inch* (4
mm*) Specify the value in increments of 0.1 inch (1 mm).
0.0–2.0 inch
(0–50 mm)
0.2 inch* (4
mm) Specify the value in increments of 0.1 inch (1 mm).
0.0–2.0 inch
(0–50 mm)