Dell 1815dn Multifunction Mono Laser Printer User Manual Download Page 63

Page: 63 / 148

Maintaining the Toner Cartridge

Storing the Toner Cartridge

Store the toner cartridge in the original packaging until you are ready to install it.

Do not store the toner cartridge in:

Temperatures greater than 40° C (104°

An environment with extreme changes in humidity or temperature

Direct sunlight

Dusty places

A car for a long period of time

An environment where corrosive gases are present

An environment with salty air

Redistributing Toner

When the toner cartridge is near the end of its life, white streaks or light print occurs. The LCD displays the warning message,

Toner Low

. Thoroughly shake

the cartridge from side-to-side 5 or 6 times to distribute the toner evenly inside the cartridge and temporarily improve print quality.

Open the front cover.

Pull the toner cartridge out.

Thoroughly shake the cartridge from side-to-side 5 or 6 times to distribute the toner evenly inside the cartridge.

Holding the toner cartridge by the handle and slowly insert the cartridge into the opening in the printer.

NOTE:

If toner comes into contact with your clothing,

wipe the toner off with a dry cloth and wash your clothing in cold water. Hot water sets toner

into fabric.

CAUTION:

Do not touch the green underside of the toner cartridge. Use the handle on the cartridge to avoid touching this area.

Summary of Contents for 1815dn Multifunction Mono Laser Printer





















































































































































Search results

Summary of Contents for 1815dn Multifunction Mono Laser Printer

Reviews:

Related manuals for 1815dn Multifunction Mono Laser Printer

Brands by name

Popular brands

Dell 1815dn Multifunction Mono Laser Printer, User Manual

Search results

Summary of Contents for 1815dn Multifunction Mono Laser Printer

Reviews:

Related manuals for 1815dn Multifunction Mono Laser Printer

Brands by name

Popular brands