Dell 1815dn Multifunction Mono Laser Printer User Manual Download Page 139

Page: 139 / 148

Open the rear cover.

Unfold the duplex guide fully.

Pull the jammed paper out.

Return the duplex guide and close the rear cover.

Open and close the front cover.

Printing automatically resumes.

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be avoided. When a paper jam occurs, follow the steps outlined in

"Clearing Jams in the Paper

Paths"

Follow the procedures in

"Loading Print Media in the Paper Tray"

. Ensure that the adjustable guides are correctly positioned.

Do not overload the paper tray. Ensure that the paper is below the paper capacity mark on the inside wall of the paper tray.

Do not remove the paper from the tray while your printer is printing.

Flex, fan and straighten the paper before loading.

Do not use creased, damp or curled paper.

Do not mix paper types in the paper tray.

Use only recommended print materials. See

"Paper Specifications"

Ensure that the recommended print side of print materials is facing down in the paper tray and facing up in the bypass tray.

Ensure that the duplex unit is installed correctly.

Clearing LCD Error Messages

Display

Meaning

Suggested solutions

# Not Assigned Choose Another

You have tried to delete the number for the delayed fax
job.

Verify the number to be deleted and try again.

Summary of Contents for 1815dn Multifunction Mono Laser Printer





















































































































































Search results

Summary of Contents for 1815dn Multifunction Mono Laser Printer

Reviews:

Related manuals for 1815dn Multifunction Mono Laser Printer

Brands by name

Popular brands

Dell 1815dn Multifunction Mono Laser Printer, User Manual

Search results

Summary of Contents for 1815dn Multifunction Mono Laser Printer

Reviews:

Related manuals for 1815dn Multifunction Mono Laser Printer

Brands by name

Popular brands