Dell 1815dn Multifunction Mono Laser Printer User Manual Download Page 4

Page: 4 / 148

Fonts

The Dell Laser printer supports the following fonts:

Installing the Toner Cartridge

Open the front cover.

Remove the toner cartridge from its bag and thoroughly shake the cartridge from side-to-side to distribute the toner evenly inside the cartridge.

Press:

To:

Dial/Enter number or enter alphanumeric characters.

Store frequently used fax numbers in memory or search for stored fax numbers or email
addresses.
It also enables you to print a Phonebook list.

Insert a pause into a fax number in edit mode.

CAUTION:

To prevent damage, do not expose the toner cartridge to light for more than a few minutes.

Summary of Contents for 1815dn Multifunction Mono Laser Printer





















































































































































Search results

Summary of Contents for 1815dn Multifunction Mono Laser Printer

Reviews:

Related manuals for 1815dn Multifunction Mono Laser Printer

Brands by name

Popular brands

Dell 1815dn Multifunction Mono Laser Printer, User Manual

Search results

Summary of Contents for 1815dn Multifunction Mono Laser Printer

Reviews:

Related manuals for 1815dn Multifunction Mono Laser Printer

Brands by name

Popular brands