DEC DECstation 5000 Model 100 Series, Maintenance Manual

Page: 219 / 269

Table F-17 describes the error codes used in real-time test error
messages.
Table F-17. Real-Time Test Error Codes
Error Code Meaning
1 UIP bit remained set past allotted time.
2 Error occurred when setting real-time clock control registers.
3 Real-time clock interrupt was pending when its should not
be.
4 Error occurred setting real-time clock time registers.
5 Allowed time ran out while waiting for interrupt.
6 Real-time clock seconds were not set to zero on wraparound.
7 Real-time clock minutes were not set to zero on wraparound.
8 Real-time clock hours were not set to zero on wraparound.
9 Real-time clock day was not set to 1 on wraparound.
10 Real-time clock date was not set to 1 on wraparound.
11 Real-time clock month was not set to 1 on wraparound.
12 Real-time clock seconds were not zeroed on wraparound.
Test Commands and Messages Produced by Version PDE3 ROM Chips F–13