Nonvolatile RAM (NVR) test
The nonvolatile RAM (NVR) test checks the system module
nonvolatile RAM. To run the NVR test, type t 7/rtc/nvr
[pattern] and press Return.
When you type the NVR test command, replace the optional
pattern parameter with a specific pattern that you want to use
in the test.
NVR test error messages
NVR test error messages have the form
?TFL: 7/rtc/nvr (code: description)
?TFL 7/rtc/nvr indicates that the NVR test reported an
error.
code represents a code that identifies which portion of the
test failed.
description represents additional information that describes
the failure.
Table D-17 lists error codes and descriptions found in NVR test
error messages.
Table D-17.
NVR Test Error Codes and Descriptions
Error Code and Description
Meaning
(1: address=xx, sb yy)
Incorrect pattern read from NVR. The
address value is the actual value found at
that address, followed by what the value
should be.
(2: address=xx, sb yy)
Incorrect pattern read from NVR. The
address value is the actual value found at
that address, followed by what the value
should be.
D–28
Test Commands and Messages
Summary of Contents for DECstation 5000 Model 100 Series
