erl Command
Use the erl command to display or clear the log of the first
several errors that occurred since the most recent power-up or
reset. The erl command format is erl [-c]
To display the current error message log, use the erl
command without the -c option.
To clear the error message log, include the -c option when
you type the erl command.
go Command
Use the go command to transfer system control to a specific
system address.
The go command format is go [adress]
To transfer system control to the address specified in the
last boot -n command, type the go command without the
adress parameter. If you omit the parameter adress, and if
no previous boot -n command has been issued, the system
ignores the go command.
To transfer system control to the contents of a specific
address, include the parameter adress. Replace the
parameter adress with the address to which you want
to transfer control.
Console Commands
C–19
Summary of Contents for DECstation 5000 Model 100 Series
