t ? Command
The t ? command displays a list of test commands and their
format. To use the t ? command, type t ? test and press Return.
Include the optional test parameter to display the format of a
specific test. Replace test with the number of the test whose
format you want to display. If you do not specify a test number,
a list of all test commands and their formats appear on the
monitor.
Resetting the System
To reset the entire system, use the init command.
To reset a SCSI bus use the scsi rst command.
init Command
The init command fully initializes the system. The effect of
the init command is the same as pressing the reset button or
turning the power on, except that the system does not run a
power-up self-test.
scsi rst Command
The scsi rst command resets all devices on a SCSI bus. To use
the scsi rst command, type scsi rst dev, where you replace dev
with the device specification of the SCSI bus.
E–26
Console Commands Generated by Version PDE3 ROM Chips
Summary of Contents for DECstation 5000 Model 100 Series
