To Remove the Front Cover Plate
1.
Make sure the system power is off.
2.
Remove the system unit cover. Refer to the previous section
for directions.
3.
Loosen the two captive screws.
4.
Tilt the top of the plate down and lift it away from the
chassis.
To Install the Front Cover Plate
5.
Make sure the system power is off.
6.
Insert the tabs on the bottom of the plate into the slots in
the front of the chassis.
7.
Tilt the plate forward.
8.
Tighten the two captive screws.
2–8
Service Operations
Summary of Contents for DECstation 5000 Model 100 Series
