DataDirect Networks EF2800, User Manual

Page: 237 / 381

214
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
C r e a t i n g a n d M a n a g i n g A r r a y s & P a r t i t i o n s
NOTE: A RAID 10 array is created when there are more than two drives
in a mirrored array.
See Appendix B , "Array Basics" on page 185 for more information.
If you selected RAID 50 as the array type, the Select RAID 50 Array
Size screen displays (not shown) with all possible configurations
for the array and drive combinations. Select the configuration you
want, press <Enter>, and skip the next step.
If you selected any array type other than RAID 50, the Number of
Drives screen displays.
6.
Enter the number of drives (excluding spares) you want in the
array and press <Enter>. The Select Drives screen displays
(Figure 96)
.
The list includes all available drives, that is, drives that are not
members of an array and are not assigned as a dedicated or pool
Figure 95. Select Number of Drives for Array
Figure 96. Select Drives for Array