DataDirect Networks EF2800, User Manual

Page: 327 / 381

304
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
C o n f i g u r i n g t h e E F 2 8 0 0
channel via SCSI protocol extensions. (for more information about
LUNs, see section
H.4 on page 305 )
• If you are not using CAPI, you can set the CAPI LUN to NONE. If you
are using CAPI, you can set it to a value of 0-63. You have two
options for setting the LUN:
- NONE—Use this setting if you are not using CAPI to configure
the
EF2800
.
- Any number between 0 and 63—Select a specific number if you
want the CAPI LUN to stay the same when you restart (this
change takes effect immediately unless the CAPI LUN is
currently in use).
To configure the host channels:
1.
From the System Menu, select
Configuration Menu
and press
<Enter>. The Configuration Menu displays.
2.
Select
Host Configuration
and press <Enter>. The Select Host
Channel screen displays.
3.
Select the host channel you want to configure and press <Enter>.
The Topology screen displays. An * displays next to the current
setting.
4.
Select the option you want and press <Enter>. The Link Speed
screen displays. An * displays next to the current setting.
5.
Select the option you want and press <Enter>. The Target ID
screen displays.
6.
Select the option or number you want and press <Enter>. The
CAPI LUN screen displays.
7.
Select the option or number you want to use. There is just one
CAPI LUN for each SM module.
8.
The system prompts you to confirm changes. Select
Yes
and press
<Enter> to make the changes.