DataDirect Networks EF2800, User Manual

Page: 289 / 381

266
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
M o n i t o r i n g S y s t e m S t a t u s
E.4 Displaying Hardware and Configuration
Information
You can display the EF2800’s hardware and configuration information.
This is where you can see what version of the firmware you have.
Technical support personnel may request this information.
You can display the hardware and configuration information two ways:
• Hardware information only
• Hardware and configuration information
Figure 143 lists the configuration information that is available.
Figure 143. Configuration Information (per SM)
Group Field What displays Field What displays
HOST 0
HOST 1 Active
Channel Speed—1 Gb/s or 2
Gb/s as set in the Disk
Array Administrator
software.
Topology Loop or Point-to-Point
as set in the Disk Array
Administrator software.
Node
WWN FC World Wide Name
for node.
Port WWN FC World Wide Name
for port.
Loop ID SOFT or a specific
number as set in the
Disk Array
Administrator software. Current Loop
ID Currently assigned
value or Inactive if the
FC link is not active.
FC Addr 24-bit FC address or
None if the FC link is not
active. AL_PA Currently assigned
value or None if the FC
link is not active.
CAPI LUN NONE or specific
number as set in the
Disk Array
Administrator software.