DataDirect Networks EF2800, User Manual

Page: 72 / 381

A c c e s s i n g t h e E F 2 8 0 0 S A M S o f t w a r e
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
49
2.
Enter the IP address for one of the EF2800 SMs in the browser’s
Address or Location field and press
< Enter>.
The SAM Login page displays
(Figure 41)
. If the page does not
display, be sure that you entered the correct IP address. You must
be sure that you have set up either a temporary or permanent IP
address for at least one SM. For information about setting up the
IP addresses for the first time, see Section
3.2 on page 45. If you
still cannot access SAM, use the RS-232 connection to check the
IP addresses and the HTTP setting. See Section
3.2.1 on page 46
and Section 3.4.1 on page 53.
3. Select the User Level.
You log in using either a monitor password, which only lets you
check the status of the EF2800 and associated arrays, or a manage
password, which lets you check the status and fully configure the
EF2800. Only one manage user can log in to each EF2800 at the
same time.
4. Enter the Password. The default passwords are as follows:
- Monitor users—monitor
- Manage users—manage
To change the passwords, select
Manage EF2800
>
General Config
>
Passwords/Security
.
5. Click
Log In
. The Status Summary page displays where you can
see the status of the EF2800
(Figure 42)
. Click a link on the left side
Figure 41. SAM Login Page