DataDirect Networks EF2800, User Manual

Page: 180 / 381

T r o u b l e s h o o t i n g a n d P r o b l e m S o l v i n g
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
157
4.
Pull and swing open the latches to cam the module out of the bay.
5.
Grip the latch handles and the module out of the bay
(Figure 69)
.
10.7.3.2 Inserting the Module
1.
With the latches in the open position, slide the module into the bay
until the latches engage automatically.
2.
Cam the module home by manually closing the latches. A click
should be heard as the latches fully engage.
3.
Reconnect the cables to the module.
10.7.3.3 Insertion/Removal of SFP Modules
The I/O module is fitted with four Small Form Factor (SFP) GBIC
modules. Replacement of these modules should be performed in
accordance with the following procedure:
1.
Press down firmly on the removal tab located at the bottom of the
cable.
2.
Remove the module by firmly gripping each side of it.
C
AUTION
: If the module cannot be easily removed do not use force.
Repeat step
1
.
Figure 69. Removing an LRC I/O Module