DataDirect Networks EF2800, User Manual

Page: 77 / 381

54
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
A c c e s s i n g t h e E F 2 8 0 0 S A M S o f t w a r e
To set SAM passwords:
1. From SAM, select
Manage EF2800
>
General Config
>
Passwords/
Security
. The Passwords/Security page displays.
2. In the Password Configuration panel, enter the
Monitor
and
Manage
passwords. You can enter up to 31 characters for each
password. You can only use letters, numbers, and underscores.
3. Click
Change
.
3.5.2 Setting Your User Preferences
You can set your user display preferences to meet your needs.. .
To set your user preferences:
1.
In SAM, select
Manage EF2800
>
General Config
>
User
Preferences
. The User Preferences page displays.
2. Set your preferences.
- Page Refresh Rate: Select how often you want SAM to refresh
its pages based on the speed of your computer and Ethernet
connection (default is Fast):
• Fast: Use for fast computers with a fast Ethernet connection
(for example, Pentium III 500 MHz or higher with a T1
connection).
• Medium: Use for slower computers with a slower Ethernet
connection (for example, Pentium III 400 MHz and slower
with a cable modem or DSL connection).
• Slow: Use for the slowest computers with a slower Ethernet
connection (for example, Pentium II 200 MHz and slower
with a dial-up modem of 33.5–56 K connection).
- Auto-Logoff Timeout: Enter the number of idle minutes before
the SAM session times out and requires you to log back in. You
can enter between 0 and 255 minutes, with 0 meaning that SAM
will not timeout. The default is 30 minutes.
- Temperature Display Mode: Select Fahrenheit or Centigrade
for all temperature status displays. The default is Fahrenheit.