DataDirect Networks EF2800, User Manual

Page: 279 / 381

256
DataDirect Networks EF2800 FC RAID Storage System User Guide (V 1.0)
C r e a t i n g a n d M a n a g i n g A r r a y s & P a r t i t i o n s
- Remove Host from List: Displays the Remove Host from List
screen, which contains a list of the hosts currently on the
include or exclude list for the selected partition. Select the
WWN of the host you want to remove from the list and press
<Enter>.
- Change InfoShield Type: Displays the Change InfoShield Type
screen where you can change the InfoShield type to one of four
options described below. Changing the InfoShield type does not
add or remove any hosts in previously created lists.
- Include All Hosts: Permits all hosts on the network to access
the selected array. This is the default InfoShield type. This
results in all hosts being able to access all partitions. If you have
already created an include or exclude list, you can use this
option to override the list. Your existing list is retained and you
can display, add, or remove hosts from the list.
- Include Listed Hosts: Lets you enter or select the WWNs of the
specific hosts you want to be able to access the selected
partition. The list of WWNs and nicknames that displays
contains only the last 16 hosts that started or that you named. If
you know other WWNs or names, you can enter the WWN or
nickname.
- Exclude All Hosts: Permits no hosts on the network to access
the selected partition. If you have already created an include or
exclude list, you can use this option to override the list. Your
existing list is retained and you can display, add, or remove
hosts from the list.
- Exclude Listed Hosts: Lets you enter or select the WWNs or
names (aliases) of the specific hosts you do not want to be able
to access the selected partition. The list of WWNs and
nicknames that displays contains only the last 16 hosts that
started or that you named. If you know other WWNs or
nicknames, you can enter the WWN or nickname.
Whether you use an include or exclude list depends on your needs.
You may want to determine which list would be shorter and create
the shorter list.
4.
If you have changed the InfoShield, the system will prompt you to
confirm changes. Select
Yes
and press <Enter> to make the
changes. The system confirms that the changes are made.
5.
Press <Esc> to return to the InfoShield screen.