Data Domain DD400 Series, User Manual

Page: 89 / 300

51
Configuration Management
5
The restorer
config
command allows you to examine and modify all of the configuration
parameters that are set in the initial system configuration. See “config” on page 210 for the
complete command syntax. The
license
command allows you to add, delete, and display feature
licenses. See “license” on page 222 for the complete command syntax.
The Config Command
The
config setup
command brings up the same prompts as the initial system configuration.
You can change any of the configuration parameters as detailed in the section “Login and
Configuration” on page 29. All of the
config
operations are available only to administrative
users.
You can also use other restorer commands to change individual configuration settings. Most of the
remaining chapters of this manual detail using individual commands. An example of an individual
command that sets only one of the
config
possibilities is
nfs add
to add NFS clients.
Change Configuration Settings
To change multiple configuration settings with one command, use the
config setup
operation.
The operation displays the current value for each setting. Press the Return key to retain the current
value for a setting. Administrative users only.
config setup
See “Login and Configuration” on page 29 for details about using
config setup
. Enter the
command from a command prompt to change values after the initial setup.
Many other restorer commands change configuration settings. For example, the
user
command
adds another user account each time a user is added.
Note You can also use the DDR Manager graphical user interface to change all of the same
parameters that are available through the
config setup
command. In the DDR Manager,
select Configuration Wizard in the top section of the left panel.