Data Domain DD400 Series User Manual Download Page 241

Page: 241 / 300

203

autosupport

NAME

autosupport - Manage the weekly system report.

SYNOPSIS

autosupport add

email-list

autosupport del

email-list

autosupport display

autosupport reset all

autosupport reset schedule

autosupport reset support-list

autosupport send

email-addr

autosupport set schedule

[

weekly

daily

monthly

never

]

day1

>[,<

day2

,...>]] <

time

autosupport show all

autosupport show history

autosupport show schedule

autosupport show support-list

DESCRIPTION

The

autosupport

command manages when and at what frequency the

system report is generated and who receives email notification. The

system report gives complete system status and statistics on system use,

and enters a line in the events history log file that the report was run.

OPERATIONS

add

Add email addresses to the list that receives system reports. The

email-list

> is a list of email address that is comma-separated or

space-separated or both. Administrative users only.

del

Delete email addresses from the list. The <

email-list

> is a list of

email address that is comma-separated or space-separated or both.

Administrative users only.

display

Runs and displays the normal system report, but does not send

email. Use the up and down arrow keys to move through the log.

Use the

key to exit. Enter a slash character (/) and a

pattern to search for and highlight lines of particular interest.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands