Data Domain DD400 Series User Manual Download Page 267

Page: 267 / 300

229

ipaddr

Set the IP address for the interface. If the interface already

uses DHCP, the IP address for the interface changes, but all

other parameters received through DHCP remain the same.

netmask

Set the netmask for the interface. Use the standard form of IP

address.

Enable the interface.

down

Disable the interface.

mtu

Set the maximum transfer unit size. Supported values are from

256 to 9180. The standard size for 10 Base-T and 100 Base-T

networks is 1500. The standard size for gigabit networks is

9180. The default is 1500.

dhcp yes

Enable the use of a DHCP server for the interface. Enabling DHCP

for an interface momentarily brings down the interface while

DHCP allocates a dynamic IP address. DHCP-supplied parameters

for an interface are: IP address, netmask, DNS server list,

gateway, domainname, and host name (if the interface does not

already have a hostname).

dhcp no

Disable the use of a DHCP server for the interface.

autoneg

Let the network interface card autonegotiate line speed and

duplex setting.

duplex

Set the line use to either

full

half

duplex.

speed

Set the line speed to 10 Base-T, 100 Base-T, or 1000 Base-T

(Gigabit).

disable

Disable an Ethernet interface. Administrative users only.

enable

Enable an Ethernet interface. Administrative users only.

hosts add

Associate an IP address with a host name. The host name can be

a fully-qualified domain name, or an alias and a fully-qualified

domain name enclosed in double quotes. The entry is added to

the

/etc/hosts

file. Administrative users only.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands