Data Domain DD400 Series User Manual Download Page 141

Page: 141 / 300

Chapter 11: System Maintenance

103

The System Command

Download the new release file to the restorer directory

/ddvar/releases

To start the upgrade, log in to the restorer as

sysadmin

and enter a command similar to the

following. Use the file name (not a path) received from Data Domain. For example:

system upgrade 3.0.2.0-15045.rpm

To upgrade using FTP

/ddvar

from the restorer.

On the administrative host, use FTP to connect to the Data Domain support site:

ftp://support.datadomain.com/

Download the release recommended by your Data Domain field representative. The file should
go to

/ddvar/releases

on the restorer.

To start the upgrade, log in to restorer as

sysadmin

and enter a command similar to the

following. Use the file name (not a path) received from Data Domain. For example:

system upgrade 3.0.2.0-15045.rpm

Set the Date and Time

To set the system date and time, use the

system set date

operation. The entry is two places

for month (

through

), two places for day of the month (

through

), two places for hour (

through

), two places for minutes (

through

), and optionally, two places for century and two

places for year. The hour (

) and minute (

) entries are 24-hour military time with no colon

between hours and minutes. 2400 is not a valid entry. An entry of 0000 is midnight at the beginning
of a day. The operation is available to administrative users only.

system set date

MMDDhhmm

[[

]

For example, use either of the following commands to set the date and time to October 22 at 9:24
a.m. in the year 2004:

system set date 1022092404

system set date 102209242004

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands