Data Domain DD400 Series, User Manual

Page: 165 / 300

Chapter 12: Network Management 127
The Route Command
Display a Route
To display a route used by a restorer to connect with a particular destination, use the
route show
trace host
operation.
route trace host
For example, to trace the route to srvr24:
# route trace srvr24
Traceroute to srvr24.yourcompany.com (192.168.1.6), 30 hops
max, 38 byte packets
1 srvr24 (192.168.1.6) 0.163 ms 0.178 ms 0.147 ms
Display the Configured Static Routes
To display the configured static routes that are in the Route Config list, use the
route show
config
operation.
route show config
The display looks similar to the following (each line in the example wraps):
# route show config
The Route Config list is:
-host user24 gw srvr12
-net 192.168.1.0 netmask 255.255.255.0 gw srvr12
Display the Kernel IP Routing Table
To display all entries in the Kernel IP routing table, use the
route show table
operation.
route show table
The display looks similar to the following (each line in the example wraps):
# route show table
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0
0.0.0.0 192.168.1.2 0.0.0.0 UG 0 0
Use Iface
0 eth0
0 lo
0 eth0