Data Domain DD400 Series, User Manual

Page: 160 / 300

The Net Command
122 DD400 Series Restorer User Guide
Display
Use the
net show settings
operation or click Network in the left panel of the DDR Manager
and look at Network Settings .
net show settings
The display is similar to the following:
# net show settings
Ethernet settings:
port enabled DHCP IP address netmask
---- ----- -------- --------------- ---------------
eth0 yes yes (dhcp-supplied) (dhcp-supplied)
eth1 no n/a n/a n/a
eth2 yes no 192.168.10.187 255.255.255.0
eth3 yes yes (dhcp-supplied) (dhcp-supplied)
---- ---- -------- --------------- ---------------
Display Ethernet Hardware Information
The display of the actual status of Ethernet connections has the columns:
Port is for the four Ethernet interfaces. eth0 is 10/100 Base-T, eth1 is gigabit copper, and eth2 and
eth3 are gigabit copper or Fiber.
Speed is the actual speed at which the port currently deals with data.
Duplex shows whether the port is using the full or half duplex protocol.
Supp. Speeds lists all the speeds that the port is capable of using.
Hardware Address is the MAC address.
Physical shows whether the port is Copper or Fiber .
Cable shows whether or not the port currently has a live Ethernet connection.
Display
Use the
net show hardware
operation or click Network in the left panel of the DDR Manager
and look at Network Hardware State .
net show hardware