Data Domain DD400 Series, User Manual

Page: 242 / 300

204 DD400 Series Restorer User Guide
reset all
Sets all autosupport parameters to the factory defaults.
Administrative users only.
reset schedule
Sets the weekly system report schedule to the default (daily 0300).
Administrative users only.
reset support-list
Sets the email list to the factory defaults. Administrative users
only.
send Test-run the system report and email the results to all addresses on
the autosupport list or to one specified address. After adding
addresses to the email list, always use this operation to test the
address.
set schedule
Set the verbose system report to run at a given frequency and a
given time. The schedule operation can specify a day (one or
two numerals) or on a day of the week (three letters) at a specific
time (0000). Administrative users only.
The daily and never periods do not take a < day > qualifier. The
weekly period with a < day > qualifier or the < day > qualifier without
weekly both run the command once a week. The never period
turns off the system report.
The < day > qualifier is three letters (such as "mon" for Monday)
when used with the weekly period and when used alone with
the required time entry. Use a dash (-) between days for a
range of days. For example: tue-fri .The < day > qualifier is a
day-of-the-month, from 1 to 31, when used with monthly .
< time > is 24-hour military time. 2400 is not a valid time.
"mon 0000" is midnight between Sunday night and Monday
morning.
show all
Display all autosupport parameters.
show history
Display the event history file, which includes the date for each
autosupport report. Use the up and down arrow keys to move
through the log. Use the
q
key to exit. Enter a slash character (/)
and a pattern to search for and highlight lines of particular
interest.
show schedule
Displays the system report schedule.