Data Domain DD400 Series User Manual Download Page 49

Page: 49 / 300

Chapter 1: Introduction

Hardware System-Level Interfaces

Hardware System-Level Interfaces

The front and back panels of a DD400 restorer have a number of LEDs and hardware interfaces.

Front Panel

The upper right corner of the front panel has all of the front-panel interfaces (except for the disk
activity LEDs). See Figure 3.

•

At the top is the system power on/off button.

•

Below the power button is a very small button labelled

Reset

. The button resets and reboots the

system. Do not press the button unless instructed to by Data Domain Technical Support.

•

The next button down is labelled

Mute

and turns off the power supply alarm that buzzes when

one or more power supplies is not working.

•

The top LED is the power on/off indicator that glows green when power is on.

•

The second LED is the network activity indicator that flashes green with network activity
through the Ethernet port,

eth0

. See “Hardware Interface” on page 13 to identify the port.

•

The third LED indicates extreme high temperature for either CPU inside the chassis.

•

The last LED glows amber when any one or more of the power supplies fails.

System power on/off

Reboot the system

Power supply alarm cutoff

Power on/off indicator

Power supply failure indicator

Figure 3: Front panel operations functions and indicators

Network activity indicator

Extreme temperature indicator

Rack screw

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands