Data Domain DD400 Series User Manual Download Page 169

Page: 169 / 300

Chapter 13: NFS Management

131

Reset Clients to the Default

Reset Clients to the Default

To return the list of NFS clients that can access the restorer to the factory default, use the

nfs

reset clients

operation. The factory default is an empty list. No NFS clients can access the

restorer when the list is empty. The operation is available to administrative users only.

nfs reset clients

Clear the NFS Statistics

To clear the NFS statistics counters and reset them to zero, use the

nfs reset stats

operation.

nfs reset stats

Display Active Clients

The list of active clients shows all clients that have been active in the past 15 minutes and the
mount path for each client.

Display

To display active NFS clients, use the

nfs show active

operation.

nfs show active

The display is similar to the following:

nfs show active

NFS Active Clients

path

client

-------

----------------------

/ddvar

jsmith.yourcompany.com

/backup

djones.yourcompany.com

-------

----------------------

Display Allowed Clients

The list of NFS clients allowed to access the restorer shows the mount path and the NFS options for
each client.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands