Data Domain DD400 Series User Manual Download Page 271

Page: 271 / 300

233

root_squash

Map requests from uid/gid 0 to the anonymous

uid/gid.

no_root_squash

Turn off root squashing.

all_squash

Map all user requests to the anonymous uid/gid.

no_all_squash

Turn off the mapping of all user requests to

the anonymous uid/gid.

secure

Require that all requests originate on an Internet port

that is less than IPPORT_RESERVED (1024).

insecure

Turns off the secure option.

anonuid=

Set an explicit uid for the anonymous account. The id is

an integer bounded from -65635 to 65635.

anongid=

Set an explicit gid for the anonymous account. The id is

an integer bounded from -65635 to 65635.

del

Remove client access to

/ddvar

/backup

or a

/backup

sub-directory.

disable

Do not allow NFS clients to connect.

enable

Allow NFS clients to connect.

reset clients

Set the client list to the default. Available to administrative users

only.

reset stats

Clear the NFS statistics.

show active

Display active NFS clients.

show clients

Display all allowed NFS clients.

show detailed-stats

Display NFS cache entries and status for troubleshooting.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands