Data Domain DD400 Series User Manual Download Page 262

Page: 262 / 300

224

DD400 Series Restorer User Guide

host show

Display the list of systems that receive log messages and the state

of disabled or enabled.

list

List all of the files in the log directory with the date each file

was last modified and the size of each file. The files are:

boot.log

Kernel diagnostic messages generated during the

booting up process.

ddfs.info

Debugging information created by the file system

process.

messages

The system log, which is generated by restorer actions and

from general system operations.

perf.log

Performance statistics used by Data Domain support

personnel for system tuning. The output is not user-readable.

secure

Messages from successful logins, attempted logins, and

attempts to do operations for which a user does not have

permission.

space.log

Messages about disk space usage by restorer components and data

storage, and messages from the

clean

process. A space usage

message is generated every hour. Each

clean

instance creates

about 100 messages. The messages are in comma-separated-

value format with tags that you can use to separate out the disk

space or

clean

messages. You can use third-party software to

analyze either set of messages. The tags are:

CLEAN

for data lines from

clean

operations.

CLEAN_HEADER

for lines that contain headers for the

clean

operations data lines.

SPACE

for disk space data lines.

SPACE_HEADER

for lines that contain headers for the

disk space data lines.

windows

Messages about CIFS-related activity from CIFS clients

attempting to connect to the restorer.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands