manualshive.com logo in svg

Data Domain DD400 Series, User Manual, Page: 290 / 300

Share
Download
Data Domain DD400 Series User Manual Download Page 290

 

252

DD400 Series Restorer User Guide

               

NFS socket.

 

 

               

NFS snd

 

               

The proportion of NFS-busy time spent sending data out on the

 

               

socket.

 

 

               

NFS idle

 

               

The proportion of NFS time spent idle.

 

 

               

CIFS ops/s

 

               

The number of CIFS (Common Internet File System) operations

 

               

per second.

 

 

               

ethx kB/s

 

               

The amount of data in kilobytes per second passing through each

 

               

Ethernet connection. One column for each Ethernet connection.

 

 

               

Disk kB/s

 

               

The amount of data in kilobytes per second going to and from all

 

               

disks in the restorer.

 

 

               

Disk busy

 

               

The percentage of time that all disks in the restorer are busy.

 

 

               

NVRAM kB/s

 

               

The amount of data in kilobytes per second going through non-

 

               

volatile random-access memory from reads and writes.

     

show detailed-version

 

          

Display versions of restorer components and the operating system.

     

show fans

 

          

Display the speed and status of all six system fans. The 

AvgRPM

 

          

column shows the normal operating speed for each type of fan. If

 

          

the value in the 

CurRPM

 column goes below 60% of the normal

 

          

operating speed, replace the fan.

     

show modelno

 

          

Display the hardware model number.

     

show performance

 

          

Display system performance figures for data transfer for the

 

          

last X amount of time. Duration is the hours, minutes, or

 

          

seconds for the display to go back in time. Interval is the time

 

          

between each line in the display. The default is to show

 

          

performance over the last 24 hours in 10 minute intervals. You

 

          

can set duration only, but not interval only. The raw display gives

 

Summary of Contents for DD400 Series













































































































































































































































































































Reviews:

No comments