The Net Command
116
DD400 Series Restorer User Guide
Enable DHCP
To set up an Ethernet interface to expect DHCP information, use the
net config
interface
dhcp yes
operation. Changes take effect only after a system reboot. Administrative users only.
Note
To activate DHCP for an interface when no other interface is using DHCP, the restorer must
be rebooted.
net config
interface
dhcp yes
For example, to set DHCP for the interface
eth0
:
#
net config eth0 dhcp yes
To check the operation, use the
net show configuration
command. To check that the
Ethernet connection is live, use the
net show hardware
command.
Disable DHCP
To set an Ethernet interface to not use DHCP, use the
net config
interface
dhcp no
operation. After the operation, you must set an IP address for the interface. All other DHCP settings
for the interface are retained. Administrative users only.
net config
interface
dhcp no
For example, to disable DHCP for the interface
eth0
:
#
net config eth0 dhcp no
To check the operation, use the
net show configuration
command.
Change an Interface Netmask
To change the netmask used by an Ethernet interface, use the
net config
interface
netmask
mask
operation. Administrative users only.
net config
interface
netmask
mask
For example, to set the netmask
255.255.255.0
for the interface
eth0
:
#
net config eth0 netmask 255.255.255.0
Summary of Contents for DD400 Series
