Data Domain DD400 Series User Manual Download Page 263

Page: 263 / 300

225

view

Display one screen of the most recent log entries. With no

filename

>, the command displays entries from the current messages

file. Use the up and down arrow keys to move through the log.

Use the

key to exit. Enter a slash character (/) and a pattern to

search for and highlight lines of particular interest.

watch

Display the most recent log entries and see new entries as they are

reported by the system. With no <

filename

>, the command displays

entries from the current messages file. Use

Control c

to exit.

25 May 2005

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands