Data Domain DD400 Series User Manual Download Page 174

Page: 174 / 300

CIFS Command

136

DD400 Series Restorer User Guide

Add a Client

To add a Windows machine as a client that hosts a user account, use the

cifs add /backup

command. To add a Windows machine that hosts an administrative user account as a client on the
restorer, use the

cifs add /ddvar

command. List entries can be comma-separated,

space-separated, or both. An asterisk (*) is allowed as a wild card only when used alone to mean
“all.”

cifs add /backup

client-list

cifs add /ddvar

client-list

For example, to add a client named

srvr24

that will do backups and restores with the restorer:

cifs add /backup srvr24

CIFS Command

The

cifs

command enables and disables access, sets the authentication mode, and displays status

and statistics. All

cifs

operations are available only to administrative users.

Enable Client Connections

To allow CIFS clients to connect to a restorer, use the

cifs enable

operation.

cifs enable

Disable Client Connections

To block CIFS clients from connecting to a restorer, use the

cifs disable

operation.

cifs disable

Add a Backup Client

Each Windows backup server that will do backup and restore operations with a restorer must be
added as a backup client. Use the

cifs add /backup

operation. List entries can be

comma-separated, space-separated, or both.

cifs add /backup

client-list

For example, to add a backup server named

srvr24

as a backup client for a restorer:

cifs add /backup srvr24

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands