Data Domain DD400 Series User Manual Download Page 104

Page: 104 / 300

Change a Password

DD400 Series Restorer User Guide

Change a Password

To change a user password, including the password for the

sysadmin

user, use the

user change

password

user-name

operation. The operation asks for the new password and then asks you

to re-enter the password as a confirmation. Without the

user-name

component, the command

changes the password for the current user. The

Tab

character is not allowed in a password.

Available to

sysadmin

to change any user password and available to all users to change only their

own password.

user change password [

user-name

]

For example, to change the password for a user with a login name of

jsmith

user change password jsmith

Enter new password:

Re-enter new password:

Passwords matched

Reset to the Default User

To reset the user list to the one factory default user,

sysadmin

, use the

user reset

operation.

Available to administrative users only.

user reset

The response looks similar to the following, which lists all removed users:

user reset

Removing user jsmith

Removing user bjones

Can not remove user sysadmin

Display Current Users

The display of users currently logged in to a restorer shows:

Name

is the user’s login name.

Idle

is the amount of time logged in with no actions from the user.

Login Time

is the date and time when the user logged in.

Login From

shows the address from which the user logged in.

tty

is the hardware or network port through which the user is logged in or

GUI

for the users logged

in through the

DDR Manager

web-based interface.

Session

is the user session number.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands