Data Domain DD400 Series, User Manual

Page: 268 / 300

230 DD400 Series Restorer User Guide
hosts del
Delete an IP address/host name entry from the
/etc/hosts
file.
Administrative users only.
hosts reset
Remove IP address/host name entries from
/etc/hosts
.
Administrative users only.
hosts show
Display IP address/host name entries from the
/etc/hosts
file.
ping Confirm a connection between the restorer and a host.
reset
Reset network parameters to the default of empty entries.
Administrative users only.
dns Set IP addresses for up to three DNS servers used by a restorer.
The addresses can be separated by commas, spaces, or both.
set domainname
Set a domain name for the restorer to use for the DNS, NTP, and mail
servers. Administrative users only.
set hostname
Set the name used for the restorer. Administrative users only.
show all
Display the output from the commands:
net show config
,
net
show settings
,
net show domainname
,
net show hostname
,
net show hardware
,
net show dns
, and
net show stats
.
show config
Display the configuration for the Ethernet interface (< ifname >),
which includes all status and configuration from the driver level.
When < ifname > is omitted, the configuration for all interfaces is
displayed.
show dns
Display the DNS servers used by the restorer.
show domainname
Display the domain name used for email from the restorer.
show hardware
Display Ethernet port information.
show hostname
Display the restorer machine name.
show settings
Display the settings for all Ethernet interfaces.