Data Domain DD400 Series User Manual Download Page 133

Page: 133 / 300

Chapter 10: Disk Management

Display Detailed RAID Information

The display for disks in a restorer is similar to the following:

disk show raid-info

Disk

State

Additional Status

------

-------------

---------------------------

disk1

in use (dg0)

disk2

in use (dg0)

disk3

in use (dg0)

disk4

in use (dg0)

disk5

in use (dg0)

disk6

in use (dg0)

disk7

in use (dg0)

disk8

hot spare

disk9

in use (dg0)

disk10

in use (dg0)

disk11

in use (dg0)

disk12

in use (dg0)

disk13

in use (dg0)

disk14

in use (dg0)

disk15

in use (dg0)

------

-------------

---------------------------

14 drives are “in use”

0 drives have "failed"

1 drive is “hot spare(s)”

0 drives are undergoing “reconstruction”

0 drives are “not in use”

0 drives are “missing/absent”

Display Detailed RAID Information

To display RAID disk groups and the status of disks within each group, use the

disk show

detailed-raid-info

operation.

disk show detailed-raid-info

The

Slot

column in the

Disk Group

section shows the logical slot for each disk in a RAID

subgroup. In the example below, the RAID group name is

ext3

with subgroups of

ext3_1

through

ext3_4

(only subgroups

ext_1

and

ext_2

are shown.). The number of Gigabytes allocated for the

RAID group and for each subgroup is shown just after the group or subgroup name. The

Raid

Group

section shows the logical slot and actual disks for the whole group.

On a restorer using external storage, the display does not include information about individual
disks.

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands