Data Domain DD400 Series User Manual Download Page 114

Page: 114 / 300

Autosupport Reports

DD400 Series Restorer User Guide

Reset the Schedule and the List

To reset the

autosupport

schedule and email list to defaults, use the

autosupport reset

all

operation. The operation is available only to administrative users.

autosupport reset all

Run the Autosupport Report

To manually run and immediately display the autosupport report, use the

autosupport show

report

operation. Use the up and down arrow keys to move through the display. Use the

key to

exit. Enter a slash character (/) and a pattern to search for and highlight lines of particular interest.

autosupport show report

The display is similar to the following. The first section gives system identification and uptime
information:

autosupport show report

========== GENERAL INFO ==========

GENERATED_ON=Wed Sept 7 13:17:48 UTC 2005

VERSION=Data Domain OS 3.1.0.0-19019

SYSTEM_ID=Serial number: 22BM030026

MODEL_NO=DD460

HOSTNAME=dd10.yourcompany.com

LOCATION=Bldg12 room221 rack6

[email protected]

UPTIME= 1:17pm up 124 days, 14:31, 2 users, load average:
0.00, 0.00, 0.00

The next sections display output from numerous restorer commands and entries from various log
files. At the end of the report, extensive and detailed internal statistics and information appear to
aid Data Domain in debugging system problems.

Display all Autosupport Parameters

To display all autosupport parameters, use the

autosupport show all

operation.

autosupport show all

Summary of Contents for DD400 Series













































































































































































































































































































Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands

Data Domain DD400 Series, User Manual

Search results

Summary of Contents for DD400 Series

Reviews:

Related manuals for DD400 Series

Brands by name

Popular brands