Danfoss VLT Decentral FCD 300, Design Manual

Page: 143 / 156

5.7 Factory Settings
PNU # Parameterdescription Factory setting Changes dur-
ing operation 4-setup Conv.
index
Data
type
001 Language English Yes No 0 5
002 Local/remote operation Remote-controlled Yes Yes 0 5
003 Local reference 000,000.000 Yes Yes -3 4
004 Active Setup Setup 1 Yes No 0 5
005 Programming Setup Active Setup Yes No 0 5
006 Setup copying No copying No No 0 5
007 LCP copy No copying No No 0 5
008 Display scaling 1.00 Yes Yes -2 6
009 Large display readout Frequency [Hz] Yes Yes 0 5
010 Small display line 1.1 Reference [%] Yes Yes 0 5
011 Small display line 1.2 Motor current [A] Yes Yes 0 5
012 Small display line 1.3 Power [kW] Yes Yes 0 5
013 Local control Remote control
as par. 100 Yes Yes 0 5
014 Local stop/reset Active Yes Yes 0 5
015 Local jog Not active Yes Yes 0 5
016 Local reversing Not active Yes Yes 0 5
017 Local reset of trip Active Yes Yes 0 5
018 Data change lock Not locked Yes Yes 0 5
019 Operating status at
power up Forced stop,
use saved ref. Yes Yes 0 5
020 Lock for Hand mode Active Yes No 0 5
024 User-defined Quick Menu Not active Yes No 0 5
025 Quick Menu Setup 000 Yes No 0 6
026 LED Status Overload Yes Yes 0 5
4-Setup:
'Yes' means that the parameter can be programmed individually in each of the four Setups, i.e. one single parameter can have four different data values.
No' means that the data value will be the same in all Setups.
Conversion index:
This number refers to a conversion figure to be used when writing or
reading via serial communication with a frequency converter.
See also
Serial communication.
Conversion table
Conversion
index
Conversion
factor
73 0.1
2 100
1 10
0 1
-1 0.1
-2 0.01
-3 0.001
-4 0.0001
-5 0.00001
Data type :
Data type shows the type and length of the telegram.
Data type Description
3 Integer 16
4 Integer 32
5 Unsigned 8
6 Unsigned 16
7 Unsigned 32
9 Text string
5 All About FCD 300 VLT
®
Decentral FCD 300 Design Guide
142
MG.90.S1.02 - VLT ® is a registered Danfoss trademark
5