The ID number of the BMC software appears here.
Parameter 634 Nameplate: Unit identification for communication:
The ID number for communication appears here.
Parameter 635 Nameplate: Software section no.:
The software section number appears here.
Parameter 640 Nameplate: Software version:
The unit's present software version number appears here. Example: 1.00
Parameter 641 Nameplate: BMC software identification:
The ID number of the BMC software appears here.
Parameter 642 Nameplate: Power card identification:
The ID number of the unit's power part appears here. Example: 1.15
678
Configure Control Card
Value:
Standard version (STANDARD VERSION)
[1]
Profibus 3 Mbaud Version
(PROFIBUS 3 MB VER.)
[2]
Profibus 12 Mbaud Version
(PROFIBUS 12 MB VER.)
[3]
Function:
This parameter enables a configuration of a Profibus Control Card. The
default value depends on the produced unit, also being the maximum
obtainable value. This means, that a control card only can be down gra-
ded to a lower performance version.
VLT
®
Decentral FCD 300 Design Guide
4 Programming
MG.90.S1.02 - VLT
®
is a registered Danfoss trademark
117
4
