Daikin VRVIII-S, Service Manual

Page: 220 / 266

SiENBE34-703 Wiring Diagrams
Appendix 209
FXDQ20P / 25P / 32P
FXDQ20NA / 25NA / 32NA / 40NA / 50NA / 63NAVE (with Drain Pump)
3D045500C
Printed circuit board Capacitor (M1F) Fuse (5A, 250V) Light emitting diodo. (Servicel monitor green) Magnetic relay (M1P) Motor (Indoor fan) Motor
(Drain pump)
Thermal protector (M1F Embedded) Thermistor (Air) Thermistor (Coil-1) Thermistor (Coil-2) Float switch Transformer (220V/22 V) Phase control circuit Terminal block Terminal block Electronic expansion valve Noise filter (Ferrite core) Thermistor (Air) Selector switch (Main/Sub) Connector (Adapter for wiring) Connector (Wiring adapter for electrical appendices)
Note)5 Input from outside transmission wiring central remote control
Wired remote control
POWER SUPPLY
CONTROL BOX
Connector for optional parts
Notes 1.
:
Terminal
block
,
:
Connector,
2.
: Field wiring.
3.
In case using central remote control, connect it to the unit in accordance with the attched installation manual.
4. Remote control model varies according to the combination system, confirm engineering materials and catalogs, etc. Before con
necting
5.
When connecting the input wires from outside, forced OFF or ON/OFF , control operation can be selected by remote control.
In details refer to the installation manual attached to the unit.
6.
Symbols show as follows: RED: red, BLK: Black, WHT: white, YLW: yellow, PRP: purple, GRY: gray , BLU: blue, PNK: pink, ORG:
orange, GRN: green.
Note)3
WIRED REMOTE CONTROL