Daikin VRVIII-S, Service Manual

Page: 122 / 266

SiENBE34-703 Troubleshooting by Remote Control
Troubleshooting 111
! The lower digit of the code changes as shown below when the UP and DOWN buttons are
pressed.
“Advance” button “Backward” button
(SE007)
Normal status
Enters inspection mode from normal
status when the INSPECTION/TEST
button is pressed.
If no button is pressed
for 1 minute, equipment
returns to normal status.
When mode selector
button is pressed for 1
minute, equipment returns
to normal status.
1 Press INSPECTION/TEST button
3 Press
mode
selector
button.
If no button is pressed for 1
minute, equipment returns
to normal status.
5 Press MODE selector button.
(SF008)