Accessories
ED34-862
104
FXFQ-P
JC : 3K015220E
Parts content
Suspension bracket
Hook
Refrigerant piping
Combination table
After thoroughly reading these "Safety precautions", properly perform the installation.
Caution
Indoor unit main body
Hook
High efficiency filter
High efficiency filter unit
Mounting of High Efficiency Filter Unit
Suspension bracket
Hook
Indoor unit main body
Control box cover
Suspension bracket
Match the contour.
High efficiency filter unit
High efficiency filter
unit
Indoor unit main body
Filter clasp
Name
BYCP125K-W1
Recommendations
KAFP556H80
Rotate the filter clasp by 90
°
to remove the filter
(4 positions)
Number of pieces
Shape
(4 positions)
Mounting status
FCQ(N)71KVEA
SkyAir
FXFQ25·32·40·50·63·80PVE
VRV
Figure 1
Figure 1
Figure 4
Figure 5
Figure 3
Figure 2
to
Figure 2
Figure 4
Figure 3
Figure 5
Model name
Check the following parts.
Status after mounting
1
High efficiency filter unit
1 (This document)
Panel
Sealing pad
FCQ(N)100·125·140KVEA
SkyAir
FXFQ100·125PVE
VRV
(4 positions)
KAFP557H160
Installable indoor unit model name / Panel model name
Drawing of mounting at
completion
KAFP557H80
KAFP556H160
2
Fixing method of hooks
Installation manual
• For the installation parts, accessory parts and specified components must always
be used.
If the specified components are not used, the kit may fall or an air leak may occur.
• After the completion of installation, perform a test run to check that no abnormality
is present.
• This product can be mounted to a ceiling mounted cassette-type air conditioner
<round flow >.
•
•
According to the table below, check the model name of the indoor unit main body,
then mount the product.
At the time of mounting, also refer to the installation manual of the indoor unit and to
the installation manual of the decoration panel.
* When the indoor unit main body is already installed, perform the following operations, complying with
precautions below.
Shut off power supply before performing the operation.
Remove the decoration panel from the indoor unit's main body.
(For details, refer to the installation manual attached to the decoration panel.)
* When the indoor unit main body is newly installed
(1) Remove the high efficiency filter from the chamber.
(2) Mount the high efficiency filter unit to the indoor unit main body using the hooks
(4 positions).
For the fixing method of the hooks, refer to the figure to the right. Mount at 4 positions.
* Mount so that the contours of the indoor unit main body and chamber match.
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html