
Accessories
ED34-862
108
FXFQ-P
JC : 3K015221D
Figure 5
Rotate the filter clasp by
90˚ to remove the filter
(4 positions)
Figure 2
Figure 4
Figure 3
* When the indoor unit main body is already installed, perform the following operations, complying with
precautions below.
Shut off power supply before performing the operation.
Remove the decoration panel from the indoor unit main body.
(For details, refer to the installation manual attached to the decoration panel.)
* When the indoor unit main body is newly installed
(1) Remove the ultra-long life filter from the chamber. Figure 1
(2) Mount the ultra-long life filter unit to the indoor unit main body using the hooks (4 positions).
Figure 2 to Figure 4
For the fixing method of the hooks, refer to the figure to the right. Mount at 4 positions.
* Mount so that the contours of the indoor unit main body and chamber match. Figure 3 Figure 5
Parts content
Caution
• For the installation parts, accessory parts and specified components must
always be used.
If the specified components are not used, the kit may fall or an air leak may occur.
• After the completion of installation, perform a test run to check that no
abnormality is present.
After thoroughly reading these "Safety precautions", properly perform the installation.
Filter clasp
Combination table
Ultra-long life filter
Ultra-long life filter unit
Indoor unit main body
Suspension bracket
Hook
Suspension bracket
Indoor unit main body
Refrigerant piping
Ultra-long life filter unit
Ultra-long life filter unit
Recommendations
Match the contour.
Suspension bracket
(4 positions)
Hook
Indoor unit main body
Control box cover
Hook
(4 positions)
Mounting of Ultra-Long Life Filter Unit
Sealing pad
Mounting status
: Drawing of mounting at completion
1
Number of pieces
Installation manual
Check the following parts.
1 (This document)
Fixing method of hooks
KAFP55H160
The ultra-long life filter can be reused after cleaning.
After the engineering works are completed, provide instructions to the customer
about the filter cleaning interval and how to remove the filter.
Recommendations
Ultra-long life filter unit
This product can be mounted to a ceiling mounted cassette-type air conditioner
<Round flow>.
According to the table below, check the model name of the indoor unit main body, then
mount the product.
At the time of mounting, also refer to the installation manual for the indoor unit and to
the one for the decoration panel.
•
•
•
BYCP125K-W1
Model name
Name
2
Shape
SkyAir
FCQ(N)71·100·125·140KVEA
VRV
FXFQ25·32·40·50·63·80·100·125PVE
Status after mounting
Installable indoor unit model name / Panel model name
Panel
Figure 1
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html