![background image](http://html.mh-extra.com/html/daikin/vrv-iii/vrv-iii_manual_502210091.webp)
Accessories
ED34-862
86
FXFQ-P
BYCP125K-W1
—
Decoration Panel
1. BEFORE INSTALLATION
1. PRECAUTIONS
•
Refer also to the installation manual attached to the indoor unit.
2. ACCESSORIES
•
Installation manual.
3. NOTE TO INSTALLER
•
Be sure to instruct the customer how to properly operate the system showing him/her the attached
operation manual.
2. PREPARATION OF DECORATION PANEL
<<For this unit, you are able to select air flow directions. To discharge air in 2 or 3 directions, it is necessary
to purchase optional blocking pad kit.>>
HANDLING OF DECORATION PANELS
•
Never place the panel facing down nor lean it against a wall nor leave it on a projecting object.
•
Never touch or put pressure on the swing flap.
(The swing flap may malfunction)
(1)
Remove the suction grille from the decoration panel.
1
Press the lever on the suction grille and lift the lever side.
(Refer to Fig. 1)
2
Detach the suction grille from the decoration panel by lifting the grille up approximately 45 degrees.
(Refer to Fig. 2)
3
Remove the transporting cardboard (in 4 locations) from the main unit.
(Refer to Fig. 3)
4
Remove the transporting tape (in 4 locations) on the back of the suction grille.
(Refer to Fig. 4)
Fig. 1
Lever
Suction grille
Corner section
decoration cover
Swing flaps
Decoration
panel
45
O
Fig. 2
(2)
Remove the corner section decoration cover.
•
Lift the four corner decoration covers in the direction of the arrow and remove.
(Refer to Fig. 5)
Cardboard
Tape
Suction grille
Rear side of the suction grille
Fig. 3
Fig. 4
Fig. 5
Corner section
decoration cover
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html