![background image](http://html.mh-extra.com/html/daikin/vrv-iii/vrv-iii_manual_502210117.webp)
Accessories
ED34-862
112
FXFQ-P
JC : 3K015219E
Parts content
Indoor unit main body
Filter chamber
Suspension bracket
Refrigerant piping
Suspension bracket
(4 positions)
Hook
Filter chamber
Match the contour
Indoor unit main body
Hook
(4 positions)
Indoor unit main body
Recommendations
Mounting of Filter Chamber
Suspension bracket
Hook
After thoroughly reading these "Safety Precautions", properly perform the installation.
Caution
• For the installation parts, accessory parts and specified components must
always be used.
If the specified components are not used, the kit may fall or an air leak may occur.
• After the completion of installation, perform a test run to check that no
abnormality is present.
Combination table
Filter chamber
Lead wire
Installable indoor unit model name / Panel model name
Installation manual
Panel
Sealing pad
KAFP55H160H
Status after mounting
Shape
* When the indoor unit main body is already installed, perform the following operations, complying with
precautions below.
Shut off power supply before performing the operation.
Remove the decoration panel from the indoor unit main body.
(For details, refer to the installation manual attached to the decoration panel.)
* When the indoor unit main body is newly installed
(1) Mount the filter chamber to the indoor unit main body using the hooks (4 positions).
Figure 1 to Figure 3
For the fixing method of the hooks, refer to the figure to the right. Mount at 4 positions.
Ultra-long life filter
1
Name
KAFP552H80
or
KAFP553H80
2
Check the following parts.
Mounting status
KAFP552H160
or
KAFP553H160
BYCP125K-W1
(When using ultra-long life filter)
Model name
1 (This document)
Filter chamber
FCQ(N)100·125·140KVEA
SkyAir
FXFQ100·125PVE
VRV
Recommendations
KDDFP
55H160
High efficiency filter
Number of pieces
FCQ(N)71KVEA
SkyAir
FXFQ25·32·40·50·63·80PVE
VRV
Fixing method of hooks
Figure 1
The ultra-long life filter can be reused after cleaning.
After engineering work is completed, provide instructions to the customer about
the filter cleaning interval and how to remove the filter.
•
This product can be mounted to ceiling mounted cassette-type air conditioner
<round flow>.
•
According to the table below, check the model name of the indoor unit main body, then
mount the product.
•
At the time of mounting, also refer to the installation manual for the indoor unit and to
the one for the decoration panel.
* Mount so that the contours of the indoor unit main body and chamber are match. Figure 2 Figure 4
Figure 2
Figure 3
Drawing of mounting at
completion
Figure 4
Все каталоги и инструкции здесь:
http
:
//splitoff.ru/tehn-doc.html