Operation Manual
SiMT041311E
111
Installation / Operation Manual
37
When?
X
Page 8
Fixing tab
Fixing tab
Dust box
2.
Open the dust box.
OPEN
Cover
Cover
Body
OPEN
Cleaning (for service personnel)
Dust box / Dust brush
When the MOLD PROOF / CLEANING FILTER lamp (green)
blinks.
The MOLD PROOF / CLEANING FILTER lamp blinks to indicate
that the dust box needs cleaning when there is dust in the dust
box or when the dust brush gets dirty with the CLEANING FILTER
operation (automatic or manual).
(Dust box cleaning indicator)
Clean the dust box.
CLEANING FILTER operation cannot be performed while the lamp
is blinking.
How?
• Use a vacuum cleaner to remove dust or wash with water.
• If you have washed the dust box with water, dry it well in the
shade.
Reset the indicator after cleaning.
Turn on the circuit breaker, and press and then while
the air conditioner is not operating.
• The dust box cleaning indicator goes out.
Removing the dust box
Do not direct the
body downward, as
dust is collected
there.
1.
Slide the right and left fixing tabs
(blue) inwards and slowly pull the
dust box out with both hands.
1) Slide the cover (dark grey) to
the
Õ
direction and release
the lock.
2) Turn the cover to open
the dust box.
CLEANING FILTER operation will not be correctly
performed if the tabs are not securely locked.
< Removing or attaching the dust brush >
1) Pull the centre of the dust brush.
2) Take out the dust brush from the right-side and left-side shaft
holes.
3) Pull out the dust brush.
For installation, attach the dust brush to the shaft holes, and
push it in the dust box.
CAUTION
Do not touch the
sharp top of the
bristles.
Shaft hole
Dust brush
Shaft hole
Confirm that the dust brush is securely attached.
Otherwise, the dust brush may not rotate and the
CLEANING FILTER operation may not be performed.
1.
Close the dust box, and then slide the
cover to lock the dust box.
Slide the cover in
the opposite
direction to
Õ
.
Attaching the dust box
2.
Hold the dust box with both hands
and attach it in the unit so that the
dust brush faces the air conditioner
side.
3.
Slide the fixing tabs at both ends
outwards.