Installation Manual
SiMT041311E
73
Installation / Operation Manual
17
Installation Tips
Removing and installing the front panel
•
Removal method
•
Installation method
Front panel shaft
Shaft hole
Removing and installing the front grille
•
Removal method
Fig. 4
Fig. 7
Fig. 1
Fig. 2
Fig. 3
Fig. 5
Flathead screwdriver
Screw cover
Fig. 6
Service lid
Top view
Streamer unit
Front grille (bottom)
1) Hook your fingers on both sides of the front panel and open until the panel stops.
Pushing further up from the stopping position allows the panel to be removed more easily.
2) While pushing the left side front panel shaft outward, push up the front panel and remove it. (Remove the right side front panel
shaft in the same manner.)
3) After removing both front panel shafts, pull the front panel toward yourself and remove it.
Front panel
shaft
Front panel
shaft
Insert the right and left front panel shafts on the front panel
into the shaft holes one at a time and slowly close the
panel.
(Press on both sides of the front panel.)
1) Remove the front panel.
2) Direct the flap and the auxiliary flap downward.
3) Remove the streamer unit. (See
Fig. 1
)
4) Remove the screws that secure the front grille (right). (3 screws) (See
Fig. 2
)
5) While lifting up the front grille (top) with the flathead screwdriver, unhook the tabs and remove the front grille (right).
(See
Fig. 3
)
6) Remove the screws that secure the front grille (left). (2 screws) (See
Fig. 4
)
7) While lifting up the front grille (top) with the flathead screwdriver, unhook the tabs and remove the front grille (left).
8) Insert the flathead screwdriver and remove the screw cover. (See
Fig. 5
)
9) Remove the screw that secures the service lid and remove the service lid. (See
Fig. 6
)
10) While lifting up the centre part of the front grille (bottom) toward yourself, unhook the 3 tabs. (See
Fig. 7
)
Front grille
(left)
Front grille
(right)