SiMT041311E
Main Functions
Function and Control
38
1.13 MOLD PROOF Operation
Outline
This is an integrated naming of functions of inside drying and moisture exhaustion. Drying inside
the air conditioner prevents mold and odors from growing.
Operation
Automatic or manual operation can be selected.
Automatic operation
If MOLD PROOF operation is set ON, the MOLD PROOF operation starts automatically after
COOLING, SARARA DRY, or COOLING DRY operation. Operation starts depending on the
amount of time the unit has been run. (approximately once every 2 weeks)
Manual operation
∗
Refer to the operation manual for details.
1.14 CLEANING FILTER Operation
Operation
Automatic or manual operation can be selected.
It takes about 11 minutes for cleaning.
∗
Refer to the operation manual for details.
Detail
CLEANING FILTER operation (manual)
The unit only accepts the CLEANING FILTER operation signal sent from the remote controller
while it is not operating.
As the unit is not considered to be operating during MOLD PROOF operation, MOLD PROOF
operation is stopped before switching to CLEANING FILTER operation.
When the 24 HOUR FRESH AIR SUPPLY VENTILATION is on, the unit temporarily suspends
the ventilation (closes all the panels and flaps, stops the fan, stops the ventilation) and starts the
CLEANING FILTER operation. 24 HOUR FRESH AIR SUPPLY VENTILATION will be restarted
after the CLEANING FILTER operation is completed.
(R19709)
MOLD PROOF
(R19710)
CLEANING
FILTER