Main Functions
SiMT041311E
15
Function and Control
1.3.2 Room Shape and Installation Position
Airflow direction is properly controlled by setting the room shape and installation position of the
indoor unit in the SET UP menu of the remote controller.
The angle of the flap will be set facing higher than the default setting when the room shape is
set to horizontal.
Refer to the operation manual for details.
When
Circulate setting
is set to
Low
in the service setting menu of the remote controller, the
flap position for oblong room setting is about the same as for horizontal room setting.
Refer to page 194.
1.3.3 Circulation Airflow, BREEZE Airflow, Comfort Airflow
Outline
•
As the auxiliary flap turns the airflow toward the ceiling, it sends the air far in cooling
operation, or stirs the warm air near the ceiling in heating operation, to resolve the
temperature unevenness not only horizontally but also vertically.
•
The flaps are set facing higher than the usual position, so as to turn the airflow toward the
ceiling.
Circulation Airflow
BREEZE Airflow
•
When the up/down airflow direction is set to
BREEZE
, BREEZE airflow starts generating
breeze-like airflow.
•
There are several patterns of swinging main flap (lower) and auxiliary flap (upper) with
intervals. These patterns appear in random order.
•
While according to the set airflow rate, fan speed is slightly changed from the set airflow rate
by a random amount in order to simulate natural wind.
•
The range of airflow rate fluctuation can be changed as preferred (
Auto, Low
) with the
remote controller.
Comfort Airflow
•
Comfort airflow adjusts the airflow direction to avoid directly blowing at a person.
•
Refer to 3-Area INTELLIGENT EYE Operation on page 31 for details.
The circulation flaps and the bottom air inlet create
circulation airflow in the whole room.
Circulation airflow
Air blown from air conditioner
Takes air from the
bottom air inlet.
Blows air quickly
and far with
circulation flaps.
Takes air from the
bottom air inlet.
(R19694)
Indoor
unit
