SiMT041311E
Operation Manual
Installation / Operation Manual
110
Turn on the circuit breaker, and press and then while
the air conditioner is not operating.
• The streamer unit cleaning indicator goes out.
36
When?
How?
X
Page 8
If dust adheres to the needles
Dust
Cotton bud
Streamer unit
Attaching the streamer unit
Insert the streamer unit all the way in.
Streamer unit
• Do not touch the aluminium fins of the indoor unit. (It may cause an injury.)
• Do not use the following to clean the air conditioner. (It may cause deformation, discolouration or scratches.)
– Water hotter than 40˚C
– Polishing compound
– Volatile liquid such as benzene, petrol and thinner
– Rough materials such as scrubbing brush
CAUTION
When the TIMER lamp (orange) blinks or once in a season.
1) Soak the streamer unit in lukewarm water or cold water (for
about 1 hour).
2) Use a cotton bud or soft cloth to clean the unit.
(Wear rubber gloves.)
3) Wash the unit with running water and drain it thoroughly.
4) Dry the unit in a well-ventilated shady area (for about 1 day).
The TIMER lamp blinks to indicate that the streamer unit needs
cleaning when the total operation time of the air conditioner
exceeds 1,800 hours.
(Streamer unit cleaning indicator)
Clean
the streamer unit.
Streamer discharge is disabled while the lamp is blinking.
Removing the streamer unit
Hold the grip of the streamer unit and
pull it toward yourself.
Grip
Gently wipe the dust from the needles with a soft material such
as a cotton bud, moistened with water or neutral liquid detergent.
When wiping dust off, be careful not to deform the needles.
A deformed needle will lower the deodorisation ability.
Attention
• If you cannot remove dirt or dust completely, add neutral
liquid detergent to lukewarm water or cold water and soak
the filter in it.
• Follow the instructions regarding neutral liquid detergent
when you use it. Wash the streamer unit thoroughly with
water after using detergent to remove any residue.
• Be careful not to leave any lint on the streamer unit. (Lint
may cause the unit to malfunction.)
• Do not disassemble the streamer unit.
Wipe the needles gently
from the root to the tip.
Reset the indicator after cleaning.