SiMT041311E
Operation Manual
Installation / Operation Manual
84
10
X
Page 31, 33
To set the clock
1.
Press .
2.
Press to set the clock to the current
time.
3.
Press .
< To set the clock after replacing the batteries >
To set the position where the indoor unit is installed
Set “INSTALLED POSITION” in the menu settings.
To set the brightness of the indoor unit lamps
Press .
• Each time you press , the time changes by 1 minute. If
you press and hold the button, the time changes by
10 minutes.
• After “ CLOCK Set ” appears, the normal screen is
displayed again.
When the clock is set, the set time is saved in the indoor unit. After replacing the batteries,
direct the remote controller toward the indoor unit and press . (The time will be set
automatically.) If “12:00” keeps on blinking, follow steps 1 to 3 above.
• To adjust the airflow properly, set the “INSTALLED POSITION”.
BRIGHTNESS High
(default)
BRIGHTNESS Low
BRIGHTNESS Off
Note on setting the clock
• If the indoor unit’s internal clock is not set to the correct time, the ON/OFF TIMER, COMFORT SLEEP TIMER and QUICK HEATING
TIMER will not operate punctually.