![background image](http://html.mh-extra.com/html/daikin/2amx40g2v1b/2amx40g2v1b_service-manual_501057157.webp)
SiBE12-933_A
Instruction
Operation Manual
147
WEEKLY TIMER Operation
8. Press “SELECT button” to select
the desired temperature.
• The temperature can be set between 10°C
and 32°C.
Cooling: The unit operates at 18°C even if it is
set at 10 to 17°C.
Heating: The unit operates at 30°C even if it
is set at 31 to 32°C.
• To return to the time setting, press “BACK
button”.
• The set temperature is only displayed when
the mode setting is on.
9. Press “NEXT button”.
• The temperature will be set and go to the next
reservation setting.
• To continue further settings, repeat the
procedure from STEP
2
.
10.Press “
button” to complete
the setting.
• Point the remote controller toward the air
conditioner and press the buttons to operate.
The air conditioner will beep and the
operation lamp will flash.
NOTE
WEEKLY TIMER
• Do not forget to set the time on the remote control first.
• The day of the week, ON/OFF time can be set with WEEKLY TIMER. For ON-TIMER, settings other
than the above are based on the remote controller settings just before the operation.
• Both WEEKLY TIMER and ON/OFF timer cannot be used at the same time. The ON/OFF timer has
priority if it is set while WEEKLY TIMER is still active. WEEKLY TIMER is activated after the reserved
ON/OFF timer is completed.
• The “WEEKLY button” activates or deactivates the reservation.
• To set WEEKLY TIMER, press “
button” and make a reservation according to the procedures.
• Only the time and set temperature set with the weekly timer are sent with the “
button”.
Set the weekly timer only after setting the operation mode, the fan strength, and the fan direction
ahead of time.
• Up to 4 settings per day and up to 28 settings per week can be reserved with WEEKLY TIMER. If a
reservation deactivated with “WEEKLY button” is activated once again, the last reservation mode will
be used.
• Shutting the breaker off, power failure, and other similar events will render operation of the indoor
unit’s internal clock inaccurate. Reset the clock.
• The “BACK button” can be used only for the mode, time and temperature settings.
It cannot be used to go back to the reservation number.
10
9
8